Working Principal of shearing machine by Ravi Industrial Corporation
Working principle.
 |
| Hydraulic Shearing machine |
Shearing machine adopt double-cylinder hydraulic system , which is driven by upper blade stilted
with compress nitrogen return cylinder and do downward cutting action,
complete cut, then lift upper blade stilt by nitrogen return cylinder
Hold down: First pedal switch of the shearing machine give off transmation signal to electrical system, control action of electromagnetic relief valve , hydraulic oil pressure increased gradually under the control of hydraulic valve, first drive hold down oil cylinder pinch plate.
Cutting: Hydraulic oil pressure of system increase to a certain amount, two cut oil cylinder overcome compression nitrogen resistance inside nitrogen return cylinder, started descending completed shearing action. Shearing action completed.
Return
Electromagnetic valve loss of power under the control of electrical system, hydraulic system began to load relief. Nitrogen return cylinder overcome gravity on the turret lifted upper blade rest until the up dead center.
From RAVI INDUSTRIAL CORPORATION
1736 MIE PART B , BAHADURGARH.
09711271983
No comments:
Post a Comment